Magnadyne ALA200FKE owner manual Determine the Control Device, Manual Arming and Disarming

Congratulations on your purchase of a quality Silencer security system. Your new Silencer security system has been designed to provide years of trouble free service when operated and maintained in the manner set forth in this manual. Your full knowledge of the features provided by your security system and their methods of operation are essential for day-to-day usage. Please take a moment to read through this manual and become familiar with the features that pertain to your security system. Located at the back of this booklet, we have provided a listing of all the upgrade features available for your security system. Additional installed features vary by dealership, but any can be added at a later date. Contact your new car dealership for details.

The Model Number of your Silencer Security System is ALA200FKE

The primary function of this system is to provide added value to your existing OEM keyless entry or keyless entry/security system. The ALA200FKE can also be used as a stand alone Silencer remote keyless entry and security system. Please read and follow the procedures enclosed to operate your system.

Determine the Control Device

Your Silencer ALA200FKE can be controlled from the OEM installed remote system or from a SIlencer remote transmitter. Determine which device is controlling your system and proceed to that section of this manual. In some cases, the ALA200FKE will have 2 different controllers. Read the information below as it pertains to all controllers.

Controlled by OEM Keyless Remote Transmitter

Example of

Factory

Transmitter

Controlled by

Silencer Remote Transmitter

System Control by the OEM Keyless Entry Transmitter (Basic Operation)

If the vehicle you purchased came with remote keyless entry transmitters, two of the buttons on the transmitter will be used to lock and unlock your vehicle. These buttons will have the words “LOCK” and “UNLOCK” printed or engraved on them or they will have pictures of a padlock in a locked and unlocked position (see illustration at above). Use the lock and unlock buttons on the transmitter to control your new Silencer security system in the following manner.

Manual Arming and Disarming

1.Exit the vehicle and close all of the entrances.

Note: After closing the last protected entrance, you will hear the siren or horn chirp. The reason for this chirp is covered below in the “Automatic Arming” section of the manual. Proceed as follows:

2.Press the LOCK button on your keyless entry transmitter. Your Silencer security system will respond in the following manner:

A.The vehicle horn will emit a single beep.

B.The parking lights may flash one time (Parking light flash option required).

C.The LED indicator for the security system will start to flash.

The system is now armed.

3.Press the UNLOCK button on your keyless entry transmitter. Your Silencer security system will respond in the following manner:

A.The vehicle horn will emit 2 beeps.

B.The parking lights may flash two times (Parking light flash option required).

C.The LED indicator for the security system will start flashing fast indicating that the system will rearm in 60 seconds. (Opening the driver’s door or turning on the ignition key will momentarily stop the auto arming feature.)

The system is now disarmed.

2