Installation Instructions

Pedestal Mounting the Monitor

1.Loosen the thumb wheel on the base support so the nut attached to the thumb wheel can slide into the monitor’s mounting channel.

2.Slide the thumb wheel nut into the channel on the back of the monitor.

3.Position the monitor to the desired height and tighten the base support thumb wheel.

4.Adjust the tilt knob.

5.Use the double-sided foam (supplied) or mounting screws (not supplied) to secure the base support to the desired location.

Monitor’s

Mounting

Channel

Nut Base Support

Thumb Screw

Tilt Knob

Double Sided

Mounting Foam

6

Page 6
Image 6
Magnadyne M135C-4 installation manual Installation Instructions, Pedestal Mounting the Monitor