Wiring
Step 1: The radio chassis is designed to be “Panel Mounted” through a opening in the mounting panel. See the installation part of this manual for panel mounting.
Step 2: Bring all wiring for the connection of the unit (including the antenna) through the mounting hole. Connect the wiring as follows:
Yellow Wire (w/Fuse): Connect this wire to a con- stant +12 volt power source (a power source that is not controlled by the ignition key).
Red Wire: Connect this wire to a switched +12 volt power source (a power source turned on and off by the ignition key).
Blue Wire: Connect this wire to the (+) power antenna activation circuit. If no power antenna exists,
Black Wire: Connect this wire to the frame of the vehicle (ground). This wire is the chassis grounding wire for the unit.
White Wire: Connect this wire to the Left Front Speaker (+) positive terminal or wire.
White Wire with Black Stripe: Connect this wire to the Left Front Speaker
Green Wire with Black Stripe: Connect this wire to the Left Rear Speaker
Green Wire: Connect this wire to the Left Rear Speaker (+) positive terminal or wire.
Gray Wire: Connect this wire to the Right Front Speaker (+) positive terminal or wire.
Gray Wire with Black Stripe: Connect this wire to the Right Front Speaker
Purple Wire with Black Stripe: Connect this wire to the Right Rear Speaker
Purple Wire: Connect this wire to the Right Rear Speaker (+) positive terminal or wire.
Yellow Cable with Red/White RCA Connectors: Connect to the audio line output of any additional audio or video sound source.
Gray Cable with Red/White RCA Connectors: Provides L/R Channel audio signal output to an additional amplifier.
Note: This unit is designed to connect to (4) four speakers. If the installation only requires (2) two speakers, use the White and Gray wire sets to con- nect the speakers.
WARNING!
Any wires left unconnected must be
DO NOT connect speaker ground wires together.
DO NOT connect speaker ground wires to the chassis of the vehicle.
DO NOT connect front and rear speaker wires together.
FAILURE TO FOLLOW ANY OF THESE WARN- INGS WILL RESULT IN DAMAGE TO THIS UNIT AND VOIDS THE WARRANTY.
7
