Magnadyne M9800 manual Installation Procedure, Speaker Connections

Installation Procedure

Speaker Connections:

Note: Every speaker has a positive (+) and a negative (-) connection termi- nal, therefore every speaker must have two wires connected to it. To properly connect the speaker system to your new Magnadyne radio, you must have a + and - wire coming from every speaker to connect to the unit. If you are connecting 2 speakers, you should have 4 wires to connect. If you are connecting 4 speakers, you should have 8 wires to connect.

Wiring Four Speakers:

(Fader Control Operational)

Green Wire:

Connect the Green wire to the Left Front speaker “Positive” wire.

Green/Black Wire:

Connect the Green/Black wire to the Left Front speaker “Negative” wire.

Green/Red Wire:

Connect the Green/Red wire to the Left Rear speaker “Positive” wire.

Black/Green Wire:

Connect the Black/Green wire to the Left Rear speaker “Negative” wire.

Gray Wire:

Connect the Gray wire to Right Front speaker “Positive” wire.

Gray/Black Wire:

Connect the Gray/Black wire to the Right Front speaker “Negative” wire.

Gray/Red Wire:

Connect the Gray/Red wire to the Right Rear speaker “Positive” wire.

Black/Gray Wire:

Connect the Black/Gray wire to the Right Rear speaker “Negative” wire.

Wiring Two Speakers:

Green Wire:

Connect the Green wire to the Left speaker “Positive” wire.

Black/Green Wire:

Connect the Black/Green wire to the Left speaker “Negative” wire.

Gray Wire:

Connect the Gray wire to the Right speaker “Positive” wire.

Black/Gray Wire:

Connect the Black/Gray wire to the Right speaker “Negative” wire.

Warning !

1.Do Not Ground any speakers to the frame of the vehicle or to any other grounding system other than the wires provided in the harness.

2.When the 2 speaker wiring is fol- lowed, the fader control of the unit is non-functional

5