Manuals / Magnadyne / Home Audio / Stereo Receiver

Magnadyne M9999 manual Installation Procedure

Models: M9999

1 12
Download 12 pages 19.61 Kb
Page 9
Image 9

Installation Procedure

Step 1: The radio chassis is designed to be “Sleeve Mounted” through a opening in the dashboard panel. The required opening size is 182mm (7-3/16") x 84mm (3-5/16"). Cut or enlarged an opening in the dashboard to accommodate the mounting sleeve.

Step 2: If you are replacing an existing factory installed radio, an adapter harness might be avail- able for your vehicle to eliminate the need for cut- ting your factory wiring. Contact Radio Shack or other car stereo installation centers for the availabil- ity of a harness for your vehicle.

Step 3: Insert the mounting sleeve into the hole in the dashboard. Bend the metal tabs on the sleeve to secure the mounting sleeve to the dashboard.

Step 4: Bring all wiring for the connection of the unit (including the antenna) through the center of the mounting sleeve. Connect the wiring as follows:

Yellow Wire (w/Fuse): Connect this wire to a con- stant +12 volt power source (a power source that is not controlled by the ignition key).

Orange Wire: Connect this wire to the factory (+) dashboard lighting circuit that is controlled by the headlight switch or dashboard light illumination control switch (dimmer control). If no dashboard lighting circuit is available, connect this wire to the BLUE wire provided on this harness. Note: If this wire is not connected, the panel lighting on this unit will not illuminate.

Red Wire: Connect this wire to a switched +12 volt power source (a power source turned on and off by the ignition key).

Blue Wire: Connect this wire to the (+) power antenna activation circuit. If no power antenna exists, tape-off the end of this wire to prevent short- ing out of the unit.

Note: This wire can also be used to activate the panel lighting on this unit if no dashboard lighting circuit is available (see information for orange wire connection).

Black Wire: Connect this wire to the frame of the vehicle (ground). This wire is the chassis grounding wire for the unit.

White Wire: Connect this wire to the Left Front Speaker (+) positive terminal or wire.

White Wire with Black Stripe: Connect this wire to the Left Front Speaker (-) negative terminal or wire.

Green Wire with Black Stripe: Connect this wire to the Left Rear Speaker (-) negative terminal or wire.

Green Wire: Connect this wire to the Left Rear Speaker (+) positive terminal or wire.

Gray Wire: Connect this wire to the Right Front Speaker (+) positive terminal or wire.

Gray Wire with Black Stripe: Connect this wire to the Right Front Speaker (-) negative terminal or wire.

Purple Wire with Black Stripe: Connect this wire to the Right Rear Speaker (-) negative terminal or wire.

Purple Wire: Connect this wire to the Right Rear Speaker (+) positive terminal or wire.

Note: This unit is designed to connect to (4) four speakers. If the installation only requires (2) two speakers, use the White and Gray wire sets to con- nect the speakers.

WARNING!

Any wires left unconnected must be taped-off or capped off to prevent shorting.

DO NOT connect speaker ground wires together.

DO NOT connect speaker ground wires to the chas- sis of the vehicle.

DO NOT connect front and rear speaker wires together.

FAILURE TO FOLLOW ANY OF THESE WARNINGS WILL RESULT IN DAMAGE TO THIS UNIT AND VOIDS THE WARRANTY.

9

Page 8 Page 10
Page 9
Image 9
Magnadyne M9999 manual Installation Procedure
Page 8 Page 10

M9999 specifications

The Magnadyne M9999 is a cutting-edge marine audio system designed for boat enthusiasts seeking superior sound quality and advanced features. This powerful unit stands out for its robust construction and versatility, making it an ideal choice for various watercraft, from small fishing boats to luxurious yachts.

One of the main features of the M9999 is its impressive power output. With a peak power rating of 400 watts, this system delivers crisp and clear audio at high volumes, ensuring that music can be enjoyed even in the noisy environment of open water. The built-in amplifier enhances performance while minimizing distortion, providing a high-fidelity listening experience.

The M9999 is equipped with Bluetooth connectivity, allowing users to stream their favorite music wirelessly from smartphones and other devices. This technology supports a seamless user experience, enabling quick pairing and stable connections while on the move. The system is compatible with various audio formats, offering flexibility for users who enjoy diverse music libraries.

Another highlight of the Magnadyne M9999 is its user-friendly interface, featuring an intuitive control panel. The large, backlit display ensures easy navigation and readability, even in bright sunlight. Further enhancing usability, the system includes a remote control, allowing users to manage their audio settings from anywhere on the boat.

In terms of installation, the M9999 is designed with marine-grade construction to withstand the harsh conditions typically found on the water. It is resistant to moisture and corrosion, which adds durability and longevity to the unit. Its compact design also allows for flexible installation options, whether mounted on a dash or in a dedicated housing.

The M9999 integrates advanced sound processing technologies, including equalization settings and bass boost features. These capabilities enable users to customize their listening experience to suit their personal preferences and the acoustic characteristics of their vessel.

Overall, the Magnadyne M9999 marine audio system combines powerful performance, advanced features, and durable construction, making it a top choice for marine audio needs. Whether cruising leisurely or hosting a party on the water, the M9999 ensures that the music plays loud and clear, enhancing any boating experience. With its comprehensive features, this audio system exemplifies the perfect blend of technology and functionality tailored for marine environments.