CD Operation
1.Insert a compact disc into the CD disc slot (15). The disc will auto load and auto play (The disc icon in the display will begin to rotate) (Figure H).
Note: If the disc does not auto load, do not force it. Press the “Eject” button (14) as you may already have a disc inserted.
2.To change the music track, rotate the “Track” knob (3) to the right or left (Figure I). Track change indication will appear in the display area (17).
3.To preview each song on the disc for 10 sec- onds, press the “INTRO” button (6). “INT” will appear in the display area. To turn off this fea- ture, press the “INTRO” button again. The indi- cator in the display will disappear (Figure J).
4.To repeat play of a single song on the CD, press the “REPEAT” button (5) one time. The “RPT” indicator will appear in the display area (Figure K). Press the “REPEAT” button again to stop the repeat function. The indicator in the display (17) will disappear.
5.To “Pause” the playing of the disc, press the “PLAY/PAUSE” button (4) once. To resume play, press the “PLAY/PAUSE” button again.
6.To eject the disc, press the “Eject” button (14). If the CD is not removed after three seconds it will be reloaded into the unit.
Figure H
Figure I (Adjusting the Track)
INT |
Figure J (Intro Display)
RPT |
Figure K (Repeat Display)
CD Changer Control (Optional)
1.Load your CD changer with compact discs per
the manufacturer’s operating instructions.
2.Press the “MODE” (13) button until the display
reads “CDC” which indicates that the CD chang- er is active (Figure L).
3. To change the active CD, press either the “DISC |
| |
DOWN” (7) or “DISC UP” (8) buttons to scroll |
| |
through your selection of CD’s in the CD chang- |
| |
er. If a CD is not in a tray in the changer, the |
| |
M9999 will continue to scroll through the trays | Figure L (CD Changer Control Display) | |
until one is found. | ||
|
6
