Magnadyne MCS-700BW Camera Basic Features, Multiple Camera System, Illumination LEDs Lens

Monitor Basic Features (continued)

Multiple Camera System

MAN (manual) position: Refer to the LED camera selection indicators to identify what camera view is being displayed on the monitor. If your system has multiple cameras (C1) will show the rear camera view. If C2, C3 or C4 are selected the monitor’s picture will show the view of camera selected. When the vehicle is put into reverse the camera view will NOT automatically change to the rear view camera (C1).

AUTO (automatic) position: Refer to the LED camera selection indicators to identify what camera view is being displayed on the monitor. If your system has a multiple cameras (C1) will show the rear camera view. If C2, C3 or C4 is selected the monitor’s picture will show the view of the camera selected. When the vehicle is put into reverse the camera view will automatically change the picture to the rear view camera (C1).

Camera Basic Features

	2
1	3
	4

1.Microphone: Allows for audio transmission to the monitor’s internal speaker.

2.Illumination LEDs

3.Lens

4.Photo Sensor: Illuminates the LED under low-light conditions.

Note: This Rearview Security System has a CCD camera which uses LEDs to brighten-up the area under low-light conditions. The camera is not capable of night vision, but can brighten the area enough so you may be able to detect objects on your monitor. As a result, extra care should be taken under nighttime, dusk or low-light conditions.

5