Magnadyne MV-1002 owner manual Table of Contents, Video Cassette Tape Information

MV-VCR102UM 1/17/02 10:01 AM Page 3

	Table of Contents
Important Safety Instructions	2
Important Safeguards	2
Damage Requiring Service	2
Video Cassette Tape Information	3
Remote Control Battery Install / Replace	4
VCR Controls	4
Remote Control	4
Programming and Setup	5
VCR Tape Playback	5
Using VCR Special Features	5-6
Recording	6
Operating a DVD, Camcorder or Game	6
Viewing Screen Controls and Functions	7-8
Domelight Operation	8-9
Headphone Operation	9-10
Digital Headphone Operation	11
Cleaning and Maintenance	12
Trouble Shooting	13
Replacement Parts	13
Warranty	14
Replacement Parts Order Form	15

Video Cassette Tape Information

This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality video cassette. Do not use poor quality or damaged tapes.

Precautions:

•Avoid Moisture. Moisture condensation may occur on the tape if it is moved from a cold location to a warm location or visa versa, Before using a tape with these conditions, to avoid damage of the tape and your VCR, wait until the tape is at room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

Erase Prevention:

You can prevent accidental erasing of a recording by breaking off the tab on the back edge of the cassette.

If you decide to record on the tape again, cover the hole with plastic tape

Inserting a Cassette:

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the VCR. The VCR will automatically turn ON.

Removing a Cassette:

1.In the stop mode, press the “EJECT” button on the remote control or press the “STOP/EJECT” button on the VCR. The cassette will be ejected.

2.Pull the cassette out of the cassette compartment.

3.Store the cassette in its case as shown.

3