Screen and DVD/CD Functions
Turning the Unit On
Press the POWER on either the remote or the screen housing.
Adjusting the Monitor
1.Press the MENU button on either the remote or the screen housing to activate the monitor adjustment menu. The following will be displayed on the screen:
3.Use the UP and DOWN buttons on either the remote or the screen housing to adjust the screen Brightness.
4.Press the MENU button again to deselect the Brightness adjustment bar.
5.Use the UP and DOWN buttons on either the remote or the screen housing to select the next video adjustment category.
6.Select EXIT in the menu or wait 10 seconds and the menu will automatically disappear.
2.Press the MENU button again to activate the Brightness menu. An adjustment bar will appear at the bottom of the menu screen.
Inserting a DVD/CD
Label Side Up
To play a DVD/CD, insert a disc into slot with label side facing up.
Last Memory
After the engine is turned “Off” or the unit is powered “Off”, the unit will resume play at the point play was interrupted when the unit is turned back on again.
Screen’s Remote Control Sensor
6
Screen’s Remote
Control Sensor
Screen’s remote control sensor receives the remote’s infrared control signals.
