Magnavox 27MS4504R user manual Using the S-VIDEO Input Jacks, 4Press the CH + or CH- buttons

5

USING THE S-VIDEO INPUT JACKS

The S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the

playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.

NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page.

1Connect one end of the S- VIDEO CABLE to the S-VIDEO jack on the back of the TV. Then connect one end the AUDIO (red and white) CABLES to the AV2 in AUDIO L and R (left and right) jacks on the rear of the TV.

2Connect other end of the S-VIDEO CABLE to the S-VIDEO OUT jack on the back of the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

Turn the VCR and the TV

3ON.

4Press the CH + or CH- buttons

to set the TV to its SVHS2 channel. (Go to your lowest chan- nel, for example channel 1, then change channels down to find the correct source channel.)

Back of TV

Monitor 2	AV2 in	1
VIDEO
L/Mono	Y
AUDIO	Pb
		S-VIDEO

R

COMPONENT INPUT

Audio Cable

(Red and White)

					S-Video Cable
L	R	VIDEO	S-VIDEO
AUDIO OUT		OUT		OUT		OUT
2			Back of VCR 1
3	VCR (Equipped with					5
	S-Video Jacks)
	1	2	3	POWER		4
	4	5	6	CH
	7	8	9	CH
	A/CH	0	CC	VOL
	STATUS			VOL

5Now your ready to place a prere- corded video tape in the VCR and press the PLAY
button.

EXIT

MENU

SLEEP MUTE

SURF SMART

HELPFUL HINT

The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The S-VIDEO input is dominant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(puts) will not be usable.

PICTURE SOUND

MAGNAVOX