SOUND MENU CONTROLS
Using the Sound Menu Control
To adjust your TV sound, select and use the Sound
Menu Controls listed below:
1Treble:Press the CURSOR ˙or ˝buttonsto
adjust the control. The control will enhance the
high frequency sounds.
2Bass:Press the CURSOR ˙or ˝buttons to
adjust the control. The control will enhance the
low frequency sounds.
3Balance:Press the CURSOR ˙or ˝buttons
to adjust the level of sound coming from the left
and right speakers.
4AVL:(Auto Volume Leveler) Press the CURSOR
˙or ˝buttons to turn the control On or Off.
When On, AVLwill level out the sound being
heard when sudden changes in volume occur
during commercial breaks or channel changes.
5Incr. Surround:Press the CURSOR ˙or ˝
buttons to select between Dolby Virtual or Stereo
settings (If Stereo), or select Spatial or Mono (If
Mono).
6SAP:Press the CURSOR ˙or ˝buttons to
toggle this control to On or Off. SAP is short
for Secondary Audio Programming and is sent as a
third audio channel, a SAP signal can be heard
apart from the current TV program sound.Note: If
SAP is not present on a selected show No SAP
will appear on the screen.
7Stereo:Press the CURSOR ˙or ˝buttons to
select between Stereo or Mono settings. Note: If
Stereo is not present on a selected show and the
TV is placed in the Stereo mode, the sound coming
from the TV will remain in the Mono mode.
8Alt Audio Program:Press the CURSOR ˙
to select the appropriate language.
9Bass Boost:Press the CURSOR ˙or˝buttons
to toggle this control to On or Off. The Bass Boost
control allows you to increase the low-frequency
range of the TV’s sound. This creates a deeper, fuller
sound.
To switch between Digital and Analog channels, use
the A/D button on the Remote Control.
HELPFUL HINT
19
* Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol £are trademarks of Dolby Laboratories.