DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Before:
Turn on the TV, amplifier and any other device which are connected to this unit. Make sure the TV and audio receiver (not supplied) are set to the correct channel.
( | ⇒on page 10) | 2 |
1 |
1Press
2Press [OPEN / CLOSE A] and insert a disc with label facing up.
3 | Press [PLAY B] to start playback. | 3 |
|
|
|
4 | Press [STOP C] to stop playback. | 4 |
2
DISPLAY MODE
AUDIO
1 2 3
SUBTITLE
4 5 6
ANGLE
7 8 9
REPEAT CLEAR
0 +10
PAUSE |
| SKIP |
SLOW
PLAY
REVFWD
STOP
Lights up when power is on.
OPEN/
CLOSE PLAY STOP
|
|
|
| IR |
2 | 2 | 3 | 4 | 1 |
Note:
• When you play back a
•A “ 
” may appear at the
screen when the operation is prohibited by the disc or this unit.
•Some DVD may start playback from title 2 or 3 due to specific programs.
•During the playback of a
•You can change the
Disc Menu
Some discs contain menus which allow you to customize DVD playback. Use [K/ L/ s/ B] to select an item, then press
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly during playback to select the required forward or
[ENTER] (or [PLAY B]).
reverse speed.
E 1
Calling Up a Menu Screen during Playback
•Press [MENU] to call up the disc menu.
•Press [TOP MENU] to call up the title menu.
Note:
•Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details.
Resume Playback
Press [STOP C] during playback. Resume icon will appear at the
R.STOP
[PLAY B], playback will resume from the point at which playback was stopped.
Note:
•To cancel resume, press [STOP C] one more time in the stop mode.
•For MP3, playback will resume from where you stopped (if the power has been turned off, the playback will start from the beginning of the track).
•The resume playback information stays on even when the power is turned off, as long as the disc stays in the unit.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback. | PAUSE |
To continue playback, press [PLAY B]. |
The disc goes forward by one frame each time [PAUSE F] is pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
•Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in the pause mode are blurred. (Refer to pages
To continue playback, press [PLAY B].
Note:
•Fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(2x), 2(4x), 3(8x), 4(16x) and 5(32x).
Slow Forward Search
Press [FWD g] repeatedly in the pause mode
to select the required forward speed.
1 To continue playback, press [PLAY B].
Note:
•Slow forward speed is different depending on the disc. Approximate speed is 1(1/32x), 2(1/16x), 3(1/8x), 4(1/4x) and 5(1/2x).
•Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in the slow playback mode are blurred. (Refer to pages
•The reverse of slow playback is not available.
Zoom
1)Press [ZOOM] repeatedly during playback to select the required zoom factor: 2x, 3x, 4x, 1/2x or off.
x2 | x3 | x4 | x1/2 |
2)Use [K/ L/ s/ B] to slide the zoomed picture across the screen.
3)To exit zoom function, press [ZOOM] repeatedly to select off.
Note:
•Zooming function does not work while the disc menu is displayed.
•Some part of the picture may not be zoomed depending on the disc or playback status.
DVD FUNCTIONS
– 9 – | EN |
