10
Log Placement
WARNING: LOGS GET VERY HOT AND WILL REMAIN HOT UP TO ONE HOUR AFTER GAS SUPPLY IS TURNED OFF. HANDLE ONLY WHEN LOGS ARE COOL. TURN OFF ALL ELECTRICITY TO THE APPLIANCE BEFORE YOU INSTALL GRATE AND LOGS.
WARNING: THE SIZE AND POSITION ON THE LOG SET WAS ENGINEERED TO GIVE YOUR APPLIANCE A SAFE, RELIABLE AND ATTRACTIVE FLAME PATTERN. ANY ATTEMPT TO USE A DIFFERENT LOG SET IN THE FIREPLACE WILL VOID THE WARRANTY AND WILL RESULT IN INCOMPLETE COMBUSTION, SOOTING, AND POOR FLAME QUALITY.
WARNING: THIS APPLIANCE IS NOT MEANT TO BURN WOOD. ANY AT- TEMPT TO DO SO COULD CAUSE IR- REPARABLE DAMAGE TO YOUR APPLI- ANCE AND PROVE HAZARDOUS TO YOUR SAFETY.
Carefully position the ceramic fiber logs over the burner as shown in Figure 9
Proper log placement is critical to prevent sooting. Logs should be placed in the gaps between the flame peaks and should be posi- tioned so that at no time they impinge the flames.
Figure 9
Figure 10
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
MODEL LSS-35
MODEL
