Tape Operation / Recording
Dubbing tapes
1Load the prerecorded tape in tape deck 2.
●Make sure both tapes have their full spool to the left.
2Press Åon tape deck 1 and followed by ●.
3PressÉon tape deck 2.
➜ Recording will start automatically.
●Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure.
Notes:
–Dubbing of tapes is possible only from tape deck 2 to tape deck 1.
–To ensure good dubbing, use tapes of the same length.
E n g l i s h
To stop dubbing
● Press 70 on tape deck 1 and 2.
Maintenance
Cleaning the Cabinet
●Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.
●Do not use solvents such as benzene, thinner, commercially
available cleaners, or antistatic spray intended for analog records.
Cleaning the disc lens
●After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Cleaning the Heads and the Tape Paths
●To ensure good recording and playback quality, clean the heads A and B, the capstan(s) C, and pressure roller(s) D after every 50 hours
of tape operation.
●Use a cotton swab slightly moistened with cleaning fluid or alcohol.
●You can also clean the heads by playing a cleaning tape once.
Demagnetizing the heads
●Use a demagnetizing tape available at your dealer.
23
