Battery Life, Using the Holster and Flex-Stand | Fluke 787 specification

787

Users Manual

Battery Life

WWarning

To avoid false readings, which could lead to possible electric shock or personal injury, replace the battery as soon as the battery indicator (B) appears.

Table 12 shows typical alkaline battery life. To preserve battery life:

∙Use current simulation instead of sourcing when possible.

∙Avoid using the backlight.

∙Do not disable the automatic power-off feature.

∙Turn the meter off when you are not using it.

Table 12. Typical Alkaline Battery Life

Meter Operation	Hours
Measuring any parameter or simulating	80
current
Sourcing 12 mA into 500Ω	12

Using the Holster and Flex-Stand

The meter is supplied with a snap-on holster that absorbs shocks and protects the meter from rough handling. You can turn the meter over in the holster to protect the face of the meter from scratches when carrying the meter.

The holster is equipped with a Flex-Stand bail. Some uses of the holster with Flex-Stand are shown in Figure 9.

Maintenance

This section provides some basic maintenance procedures. Repair, calibration, servicing not covered in this manual must be performed by qualified personnel. For maintenance procedures not described in this manual, contact a Fluke Service Center.

General Maintenance

Periodically wipe the case with a damp cloth and detergent; do not use abrasives or solvents.

Calibration

Calibrate your meter once a year to ensure that it performs according to its specifications. Contact a Fluke Service Center for instructions.

28

Image 32

Fluke 787 user manual Battery Life, Using the Holster and Flex-Stand, General Maintenance, Calibration

Contents

787 Limited Warranty & Limitation of Liability Table of Contents 787 Index Contacting Fluke Read Safety Information before you use the meterIntroduction Safety Information 787 ProcessMeter International Symbols Meaning Symbol Meaning How to Get Started Fluke 787 ProcessMeter Getting Acquainted with the Meter Input/Output Jacks Simulate Transmitter Function Input/Output Jacks Measurement FunctionsSource Current Function Rotary Switch Positions for Measurements Functions Pushbutton Actions Rotary Switch Positions for mA Output Default Function Pushbuttons Pushbuttons Functions Pushbutton Coarse Elements of the Display Element Display Meaning Display Element MA, DC, mV, AC Or kΩ, kHz Auto 400100030 Measuring a Composite Signal Measuring Electrical ParametersInput Impedance Ranges Testing Diodes Displaying Minimum, Maximum, and Average Using TouchHold Compensating for Test Lead Resistance Using the Current Output Functions Source Mode Sourcing Current Simulate Mode Changing the Current Span Simulating a Transmitter Producing a Steady mA Output MA Output Adjust PushbuttonsAdjustment Manually Stepping the mA Output MA Stepping Pushbuttons MA Step Values Value for each span setting To 20 mA Auto Ramping the mA Output Power-Up Options Power-Up OptionsPushbutton Default Action Taken Battery Life Using the Holster and Flex-StandMaintenance General Maintenance Using the Holster and Flex-Stand Replacing the Battery Replacing the Battery Replacing a Fuse If the Meter does not Work Replacing a Fuse Replacement Parts and Accessories Replacement Parts DescriptionFluke PN or Model no Quantity MP8 Specifications ResolutionDC Volts Measurement Range V dc AC Volts Measurement Range mV dc Resolution 400.0 Accuracy % of Reading + CountsDC Millivolts Measurement AC Current Measurement DC Current Measurement Measurement Current Range ResolutionOhms Measurement Input Range Minimum Sensitivity rms Sinewave 5 Hz to 5 kHz Frequency Counter AccuracyFrequency Counter Sensitivity General Specifications Source modeSimulate Mode Diode Test and Continuity Test Certifications CSA, UL, TÜV Index Knob positions, 9 Pushbuttons Loop supply, external Index 787