787
Users Manual
Replacing the Battery
!Warning
To avoid electrical shock, remove test leads from the meter before you open the battery door.
Close and latch the battery door before you use the meter.
Remove test leads from the meter before you open the battery door.
Replace the battery as follows. Refer to Figure 10. Use an alkaline 9V battery, type ANSI/NEDA 1604A or IEC 6LR61.
1. Remove the test leads and set the rotary switch to OFF.
2. With a standard blade hand screwdriver, turn each battery door screw counterclockwise so that the slot is parallel with the screw picture molded into the case.
3.Lift off the battery door.
ee007f.eps
Figure 10. Replacing the Battery
30
