Magnavox MAS-80 warranty Timer setting, Clock setting, Press Clocktimer twice

Clock/Timer

English

	View clock	Notes:
	The clock (if it is set) will be shown in standby	– The clock setting will be cancelled when the
		power cord is disconnected or if a power failure
	mode.
		occurs.
	To view the clock in any source mode
		– During clock setting, if no button is pressed
	(CD or TUNER for example)	within 90 seconds, the system will exit clock setting
● Press CLOCK•TIMER.		mode automatically.

➜The clock is displayed for a few seconds.

➜ If the clock has not been set, "--:--" is
			Timer setting
displayed.
			The system can switch on to CD or TUNER
			mode automatically at a preset time, serving as
Clock setting
			an alarm to wake you up.
The clock can be set in either 12-hour or			IMPORTANT!
24-hour mode ("12:00 AM" or "00:00", for
			–	Before setting the timer, ensure that the
example)
			clock is set correctly.
1 In standby or view clock mode, press
			–	The timer will always be switched on
CLOCK•TIMER once. In other source mode,			after it has been set.
press CLOCK•TIMER twice.			–	The timer will not start if a recording is in
2 Press PROGRAM repeatedly to select clock			progress.
mode.			–	The volume of the timer controlled
12:00	AM" or "	00:00	playback will increase gradually from the
➜ "		" starts flashing.	minimum level to the last tuned volume
3 Press à or á on the system repeatedly to set
			level.
the hour.
4 Press í or ë on the system repeatedly to set			1 Press and hold CLOCK•TIMER for more than
the minute.			two seconds to select timer mode.
5 Press CLOCK•TIMER again to store the
			➜ "12:00 AM" or "00:00" or the last timer
setting.			setting starts flashing.
➜ The clock starts working.			➜	starts flashing.

To exit without storing the setting

●Press Çon the system.

21

8240 009 34231