Point the TV/VCR remote control at the TV/VCR. Press SPEED until the desired tape speed (SP or SLP) appears on the screen.
Press PLAY on the source unit and REC(ord)/OTR on your TV/VCR at the same time. Copying will begin.
The VCR or camcorder will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press STOP on the unit.

MC13D1MG 3/22/02 1:26 PM Page 30

30 Rerecording (Tape Duplication)

AUDIO and VIDEO OUT Jacks on source unit

(VCR or Camcorder)

Audio Cable from

AUDIO OUT to AUDIO In

VIDEO AUDIO

OUT

Video Cable from

VIDEO OUT to VIDEO In

1 Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or camcorder) to a power source after connections are made.

2

3 The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR power will turn on automati- cally.

4 Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that AUX appears on the screen.

The TV/VCR is now in Line Input or Auxiliary mode.

5

6

7 To stop copying, press STOP/EJECT on the TV/VCR, then stop the tape on the VCR or camcorder.

VIDEO AUDIO

POWE

AUDIO and VIDEO In

Jacks on TV/VCR

Helpful Hints

Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

Different brands of equipment may operate differently.

Make sure all connections are secure. Otherwise, you may not record both picture and sound.

Programs that are copyright protected may not record clearly.

Page 30
Image 30
Magnavox MC19D1MG, MC13D1MG owner manual Rerecording Tape Duplication, TV/VCR is now in Line Input or Auxiliary mode