Connecting power adapter

IMPORTANT!

Do not connect the power cord until all other connections have been made.

Never make or change any connections with the power switched on.

Note

Each time you restart the set, it stores the last function used.

This set is powered via a power adapter (supplied). See the following diagram for details.

AC120V~

1Connect the AC adapter to the jack marked with DC 12V IN on the rear panel of the set.

2Plug the two-prong end of the power cord to a grounded power outlet.

3When not using the set, turn off the power of the set before unplugging the power connector to prevent malfunctions.

Connections

E n g l i s h

11

Page 11
Image 11
Magnavox MDR700 manual Connecting power adapter