Magnavox MDV3000/F7 owner manual Others menu, Hdmi

HDMI Audio: (Default: Bitstream)

Sets the audio format for the sound output from the HDMI OUT.

HDMI:

Resolution: (Default: Auto)

You can select the desired “Resolution” among the settings.

Select the

desired

setting.

Others

In tia ize

Parental

Auto Power Off

Auto 480p 720p

HDMI

HDMI Audio

Resolution

E Others Setting

Follow steps 1 to 2 on page 15.

3Select the desired item.

	ENTER
Others menu
Language	Auto Power Off
Display	HDMI
	Parental
Video	Initialize

Audio

Others

Note:

	HDMI:
	• You cannot select the
	video resolutions which
	are not supported by the
	connected TV, except
	when this unit’s HDMI
	OUT jack is connected to
	a DVI compatible display
	devices with an HDMI-DVI
	cable (default is 480p in
DVD	such case).
	• Video and audio signals
	may be distorted
FUNCTIONS
	temporarily when
	switching to / from the
	HDMI output mode.
	Resolution:
	• Auto:
	HDMI video resolution will
	be selected automatically
	depending on the
	connected HDMI device.
	If you want to change the
	resolution manually, press
	[HDMI] repeatedly.
	• When you make a
	selection, the TV monitor
	temporarily goes blank
	and then comes back
	again. If it does not, press
	[HDMI] to change the
	resolution or press and
	hold [PLAY B] on the
	front panel for 5 seconds
	to change the setting back
	to its default.
	HDMI Audio:
	• This feature is available
	only when the display
	device is connected by an
	HDMI cable.

4

Auto Power Off: (Default: On)

Set to “On” to turn this unit off automatically after 30 minutes of no use.

Language	Auto Power Off			Select the
	HDMI
Display	Parental	Auto Power Off	On	desired
		HDMI		setting.
Video	Initialize		O f
Audio		Parental
		Initialize

			Select the
Auto Power Off		Bitstream	desired
HDMI	Resolution	LPCM	setting.
Parental	HDMI Audio	Off
Initialize

Parental:

Parental level allows you to set the rating levels of your DVD. Playback will stop if the ratings exceed the levels you set.

*1 If you have set a password already, “Enter your PIN” will be displayed and enter the current 4-digit password.

*2 If you have set a password already, enter your new PIN after entering the current password.

Rating Level: (Default: 8[Adult])							Select the
Sets the rating level for the disc playback.
							desired
	Auto Power Off						setting.
	HDMI		Rating Level
	Parental		New PIN	8[Adult]
	Initia ize
					Enter your new 4-digit
	Enter your new
	4-digit password				password again.
	(except for 4737).
	*1
		Enter New PIN				Confirm PIN
		----				----

New PIN:

You can change your password for parental controls.

5To exit “Auto Power Off”, “HDMI” or “Parental” menu

Note:

Parental:

•If you forget the password, press [4], [7], [3], [7] at step

3 above, then enter your new password.

Initialize:

•When you do not wish to initialize, press [SETUP] to exit the menu at step 4.

•The setting for “Paren- tal” will not be reset.

Enter your new

4-digit password.

*1,2

Enter New PIN

----

Initialize:

Reset to default setting.

Video	Pa	HDMI
	Initialize	Parental
Audio		Initialize
Others

Enter your new 4-digit password again.

Confirm PIN

----

Select “Yes”

Yes

No

EN – 18 –