Magnavox MDV430, MDV410 owner manual 3, 4

Hookups (cont’d) 9
Connecting the DVD Player to a TV only
TV has AUDIO (red and white) and VIDEO (yellow) IN jacks
VIDEO IN
LEFT AUDIO IN
RIGHT AUDIO IN
RL
AUDIO OUT
COAXIAL
VIDEO
OUT
Cb S-VIDEO
OUT
YCr
VIDEO
L/MONO
AUDIO
R
in
1
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
COMPONENT
VIDEO OUT
1Connect the supplied red and white audio cables to the red and white
AUDIO OUT jacks on the DVD Player and to the red and white
AUDIO IN jacks on the TV, matching the cable colors to the jack col-
ors.
2Connect the supplied yellow video cable to the VIDEO OUT jack on
the DVD Player and to the VIDEO IN jack on the TV.
3Connect the TV’s power cord to a power outlet.
Turn on the TV and set it to the Audio/Video In channel, which also
may be referred to as A/V In or Auxiliary In. This channel usually is near chan-
nel 00. See your TV owner’s manual for details.
4Connect the DVD Player’s power cord to a power outlet.
Press the POWER yybutton to turn on the DVD Player.
You should see the DVD logo on the TV screen. If you do not, check your con-
nections and make sure the TV is set to the correct Audio/Video In channel.
2
Back of TV
(example only)
1
MDV410/430 2/7/02 11:18 AM Page 9