Before you begin, turn on the power of the TV, stereo, and any other equipment connected to the DVD Player. Make sure the TV and the stereo (if applicable) are set to the cor- rect channel. Details are on pages
1 Press
2 Press OPEN/CLOSE A to open the Disc tray.
3 Place a Disc into the tray. If the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down. Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up.
4 Press Play B to close the tray. The tray will close and play will begin at the first Chapter or Track. If a DVD menu appears instead, see page 20. With some Audio CDs, playback will not begin unless you press Play B again.
With MP3 and JPEG files, play will begin at Track 1 or when you select an item and press Play B. Details are on page 29.
You also can close the tray by pressing
OPEN/CLOSE A.
5 Press Stop C to stop playback.
Remember, this DVD Player will play only certain Discs.
See page six for details.
Playing a Disc 15
1 | REPEAT | OPEN/ | 2 | ||
CLOSE | |||||
DISPLAY |
| SKIP | PAUSE | ||
5 |
|
|
|
| 4 |
1 | 2 | 3 | AUDIO |
| |
|
|
|
| SUBTITLE |
|
| 4 | 5 | 6 |
|
|
|
|
|
| ANGLE |
|
| 7 | 8 | 9 |
|
|
| CLEAR |
|
| SEARCH |
|
| 0 | +10 | MODE |
| |
|
|
|
| ||
| MENU |
| TITLE | MODE |
|
|
|
|
| ZOOM |
|
|
| OK |
|
|
|
| SETUP |
| RETURN | MARKER |
|
Helpful Hints
•An “X” may appear in the top right corner of the TV screen when you try a feature. This means either the feature you tried is not available on the Disc, or the Player cannot access the feature at this time. This does not indicate a problem with the Player.
•If a Disc is dirty or has scratches, the pictures may appear distorted and play may stop. In such cases, remove the Disc and turn off the Player. Unplug the power cord, then reconnect it to the power outlet. Clean the Disc, then turn on the Player again and reinsert the Disc for playback.
•If a Disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.
