Basic Operations: Playback

1

2

 

YER

 

PLA

 

DVD

 

TABLE

 

POR

 

DVP700

 

ON POWER OFF

 

VOLUME

 

OPEN

Before you begin, turn on the power of your TV, stereo, and any other equipment connected to the DVD Player. Make sure the TV and the stereo (if applicable) are set to the correct channel.

1Slide the POWER switch to ON to turn on the player.

2Press OPEN to open the disc tray.

3Place a disc into the tray. If the DVD is recorded on only one side, place the disc in the tray with the label facing up and the shiny side facing down. Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up.

4Press the tray door down to close the tray.

5To start playback, press B (PLAY) /OK. - To play MP3 CDs, see page 23.

6Adjust the volume by using the VOLUME control.

7To stop playback, press 9 (STOP) once. Pressing 9 (STOP) twice stops resume.

8Slide the POWER switch to OFF to turn off the player.

TIP :

During operation of the player you may hear a mechanical noise. This is normal.

14

Page 14
Image 14
Magnavox MPD-700 warranty Basic Operations Playback, Press the tray door down to close the tray