Magnavox MPD-700 warranty Volume Phones Audio Video Line Select

Connecting to additional equipment

Connecting to a TV Only

TV has only a single Antenna In or RF-In jack

			Back of TV
			(example only)
	Back of RF Modulator
		(example only)
ANT IN	TO TV VIDEO	AUDIO	IN
	IN	R	L
			CH3 CH4
Antenna or Cable TV Signal			ANTENNA IN
			RF IN

VOLUME PHONES AUDIO VIDEO LINE SELECT S-VIDEO DC IN 9V

OPTICAL

OUTOUTIN

Before you begin, make sure you have an RF modulator and extra RF coaxial cables. These are not supplied with the player, but are available from Magnavox or most consumer electronics retailers.

1Connect the supplied video cable (which has yellow markings) to the player’s yellow VIDEO (VIDEO OUT) jack. Connect the other end of the cable to the VIDEO IN jack on the RF modulator. The VIDEO IN jack on the RF modulator is usually yellow and might be labelled VIDEO, CVBS, COMPOSITE, or BASEBAND.

2Connect the supplied audio cable (which has white markings) to the player's AUDIO (OPTICAL OUT) jack.

Connect the other end of the audio cable to the AUDIO IN jacks on the RF modulator. Audio jacks on the RF modulator usually are red (right) and white (left). Match the cable colors to the jack colors.

3You probably already have an antenna or Cable TV signal connected to the ANTENNA IN jack on your TV.

Disconnect it now from the TV. Reconnect the antenna or Cable TV signal to the ANTENNA IN jack on your RF modulator.

35