Magnavox MTV-34, MTV-51, MTV-68 Basic Operation, Description of Operation, AUTO-SEARCH Operation

BASIC OPERATION

DESCRIPTION OF OPERATION

You can press the buttons on the remote control or the menu button on the TV set to adjust the picture, clock, preset, system and audio (68cm only) according to the menu shown on the screen.

PICTURE
bright	45
contrast	63
colour	63
sharp	63
tint	63
---------	+-----

AUDIO (MTV-68 ONLY)

volume 32

balance 00

---------+-----

SYSTEM colour-sys auto sound-sys 5.5m

coring on

PRESET

pos. 0

rem. on

band v-l fine semi-search auto-search

---------+-----

CLOCK
time	16:00
on-time	--:--
off-time	--:--
prompt	--:--
ch-time	16:25
pos.	10

AUTO-SEARCH OPERATION

This function will automatically set the channels on 1,2,3,4 . If you wish to set the correct stations on the corresponding channels see ‘Channel Position.’

1.Press ‘PRE’ button on the remote control to display the preset menu.

2.Press ‘P/P’ channel button to select AUTO-SEARCH item.

3.Press ‘VOL/VOL’ volume button to start auto-search.

PRESET

pos. 0

rem. on

band v-l fine semi-search auto-search

---------+-----

NOTE: You can store the TV channels from ‘0’ position in numeral sequence. The channel position will be ‘0’ again when search is finished. The colour of ‘0’ turns green when the program has been searched. Otherwise, it turns red.

8