Magnavox VRC602MG owner manual Hi-Fi Stereo Sound System, Please see additional notes on

42 Hi-Fi Stereo Sound System

Multi-Channel Television Sound system broadcasts are automatically recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, however, you’ll need to follow steps 1-5.

1

Press the VCR button, then press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

2

Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B
→ REPEAT PLAY	OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND	ON
TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select AUDIO OUT, then press the F.FWD/B button.

SELECT op
→ HIFI	ON
MONO
TO END PUSH EXIT
4

Press the PLAY/o button or the STOP/p button to select HIFI. ON will appear to the right of HIFI on the screen.

SELECT op
→ HIFI	ON
MONO
TO END PUSH EXIT
5

Press the STATUS/EXIT button.

5 2-4

1	EJECT	POWER
	MENU	STATUS/EXIT	CLEAR
	1	2	3
	4	5	6
	7	8	9
	MEMORY		ALT.CH
		0
	REC		PAUSE
	/OTR		/STILL

PLAY

REW		F.FWD
	STOP
CH.		VOL.
	MUTE
VCR	TV	CBL/DBS
VCR/TV	SPEED	TIME SEARCH
	ENTER	SLOW

Helpful Hints

•Normally, HIFI should be selected from the AUDIO OUT menu for play- back with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio playback. To do this, follow steps 1-3. At step 4, press the PLAY/o button or the STOP/pbutton to select MONO. Press the STATUS/EXIT button. HIFI will disappear from the status display.

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in HIFI will differ from the audio level of a tape recorded in MONO.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, HIFI will disappear from the status display and the tape will play in monaural sound.

Please see additional notes on page 45.