9
8
7
6
5
4
3
2
1
9

E-14

2012 September 14 HT-SB60

Maintenance

Periodically wipe the cabinet with a soft cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
Do not apply oil to the inside of each component. It may
cause malfunctions.

Error indicators and warnings

When you fail to perform operations properly, the following
messages are displayed on the sound bar.

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes
for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
Cleaning the cabinet
Display Meaning
(Display blinks)
When there is no input signal.
Play back the connected
equipment.
Nonstandard signal. Cannot
be recognized.
Signals other than DOLBY
DIGITAL, DTS, Linear PCM
cannot be recognized.
Poor connection of the digital
audio input terminal.
Turn off the sound bar and
check if the cable is
connected properly.
Demo indicator
(blinks red)
When the protection circuit is
activated.
Sound Bar
Power source AC 220 - 240 V ~ 50/60 Hz
Power
consumption Power on: 38 W
Power standby: 0.4 W (*)
Dimension Width: 1385 mm (54 - 1/2")
Height: 73 mm (2 - 7/8")
Depth: 68 mm (2 - 11/16")
Weight 3.6 kg (7.92 lbs.)
Output power RMS: Total 160 watts
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 120 W (60 W + 60 W) (1% T.H.D.)
Output
terminal HDMI™ output: (audio/video support up
to 1080p) x 1
Input terminal analogue input (AUDIO IN): x 1
500 mV / 47 kohms
Optical digital input (OPTICAL):
Square type x 1
HDMI input: (audio/video support up to
1080p) x 2
Type 2 Way speaker system
5.7 cm (2 -1/4") woofer
2.5 cm (1") Soft Dome
Maximum
input power 160 W
Rated input
power 80 W
Impedance 4 ohms
(*) This power consumption value is obtained when the
sound bar is in low power consumption mode. (Demo
indicator turns off).
Subwoofer
Power source AC 220 - 240 V ~ 50/60 Hz
Power
consumption 33 W
Output power RMS: 150 W (10% T.H.D.)
RMS: 120 W (1% T.H.D.)
Type Subwoofer system
16 cm (6 - 5/16") woofer
Maximum
input power 300 W
Rated input
power 150 W
Impedance 3 ohms
Dimensions Width: 144 mm (5 - 11/16")
Height: 430 mm (16 - 15/16")
Depth: 306 mm (12 - 1/16")
Weight 6.1 kg (13.42 lbs.)