Sharp HT-SB60 E-9, Audio connections to TVs, DVD players, VCRs, etc.

2012 September 14 HT-SB60

E-9

Audio connections to TVs, DVD players, VCRs, etc.

The illustration below shows the flows of audio and video signals.

Notes:

●Refer to the operation manual of the equipment to be connected.

●Fully insert the plugs to avoid fuzzy pictures or noises.

●Connecting via this method may disable TV internal speakers.

●In some cases, a small background noise could emit from the sound bar, when you use the RCA audio output terminal

connection from a TV-Set/DVD/Blu-ray Disc Player. In such case, please change the connection to the HDMI/ARC or

headphone terminal connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-Brand, model and age,

and it is not a quality matter from the sound bar.

Connect to the TV using an optical digital cable or an audio cable.

■Other connection (without HDMI)

DVD/Blu-ray

Disc Player

Digital tuner, etc.

Audio signal

Video signal

■Connecting a TV, or DVD player, etc.

To select OPTICAL function:

Press SOURCE button repeatedly until “OPTICAL” appears on the display.

To select AUDIO IN function:

Press SOURCE button repeatedly until “AUDIO IN” appears on the display.

Audio cable

(commercially

available)

To AUDIO IN

input terminals

Optical digital

audio cable

(commercially

available)

Sound Bar

Audio signal

To optical

digital audio

output

terminal

To audio output terminals

HEADPHONE

terminal

To O PT ICAL

IN (optical)

input terminal

Blu-Ray/

DVD player/Digital

Tun er

Ferrite core

Note:

Make sure that the audio cable end

with ferrite core is connected to the

sound bar AUDIO IN terminal.