Recording One Channel/Watching Another | Magnavox VRZ223AT instruction

VRZ223(H1690).QX33 4/9/99 9:09 AM Page 26

26 Recording One Channel/Watching Another

1

Press the VCR button.

2

Start a recording. (See page 25.)

3

Press the VCR/TV button to put the VCR in TV position. The VCR light will disappear from the VCR’s display panel.

4

Use the TV remote control to select the channel you want to watch at the TV.

5

To return to the channel being recorded, use the TV remote control to select channel 03 or 04 at the TV

(whichever channel the CH3/CH4 switch on the back of the VCR is set to).

6

Press the VCR button.

7

Press the VCR/TV button to put the VCR in VCR posi- tion. The VCR light will appear on the display panel. The channel being recorded will appear on-screen.

8

Press the STOP/p button to stop the recording.

1&6

3&7

POWER	VCR		TV	EJECT
1	2		3	VCR/TV
4	5		6
7	8		9	CHANNEL
7	8		9
VCR PLUS+	0	+100
SPEED	VOLUME			MUTE
MENU	STATUS/EXIT	CLEAR		MEMORY
REWIND	/PLAY			F.FWD
2 REC/OTR	/STOP			PAUSE/STILL
				8

Select the channel you want to

4 watch at the TV.

5 Select channel 03 or 04 at the TV.

Helpful Hints

•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details.

Image 26

Magnavox VRZ223AT owner manual Recording One Channel/Watching Another

Contents

VRZ223AT Dear Philips Magnavox product owner For Customer Use Introduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the TV and the VCR ANT Audio OUT Recording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching Another Hookups With a Stereo TV Turning on Your VCR 2Turn on the TV Automatic Channel Setup Press the VCR button Press the Menu button Automatic Channel Setup cont’d Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit 613-4 Daylight-Saving Time Language Selection Remote Control Buttons VCR Button TV Button Volume o/p ButtonsEject Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCR VCR light does not appear, press the VCR/TV button once RecordingTurn on the TV and set it to channel 3 or 4, whichever Recording One Channel/Watching Another One-Touch Recording Timer Recording Daily Timer Recording cont’d Instructions continue on Press the STATUS/EXIT button. Program WAS COM Tape Speeds PROGRAM, then press the F.FWD/B button Checking or Cancelling Timer RecordingsPress the PLAY/o button or the STOP/p button to select Program REVIEW, then press the F.FWD/B button Setting Up the VCR Plus+ Programming System Channels Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Antenna Repeat Play Press the F.FWD/B button so that on appears beside Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still Picture Automatic Operation Features Glossary Cable Box/DBS Output Channel 03 or Helpful Hints Helpful Hints cont’d Specifications Limited Warranty Video Cassette Recorder Index Automatic VRZ223H1690.QX33 4/9/99 910 AM Supplied Accessories