Introduction to DataPulse Series 3 software
DataPulse is a user friendly, Windows based, DataLogger communication software that will allow the viewing of logger data in a spreadsheet format.
The DataPulse software functions include:
•Uploading Run, Fault, and Alarm histories and the corresponding trace data.
•Uploading 5 sets of parameters stored in the DataLogger.
•Displaying and saving the above data.
Computer Requirements
The hardware requirements for DataPulse software:
•
•64 MB RAM
•20 MB hard disk storage
•Microsoft Windows 98se, ME, 2000, or XP Microsoft Internet Explorer 5.5+ or higher
•USB 1.1 or 2.0 compatible port
Software Installation
The DataPulse software is designed to auto install after CD insertion, if the installation guide does not display, then in the START menu, choose RUN. . .
and type “D:\setup.exe” where “D” is your CD drive and click “OK” or select “BROWSE” and select setup.exe and “OK”.
After DataPulse software has finished installing, connect your DataLogger to the computers USB port. Your PC will require you to install the driver for this “new hardware”. The driver is located on the DataPulse CD.
Impulse DataLogger Series 3 Instruction Manual | 2/1/05 |
| 11 of 16 |