Installing/Removing
Getting things ready to install your appliance
Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting
Unpacking
•Check the packing box for external damage. It is your responsibility to register any damage with the freight company delivering the product.
•Remove the strapping, then slide the cardboard surround off the machine. Re≠move the foam protecting material and the plastic bag.
•Write down the serial number from the box or the back of the machine.
•Destroy the carton, plastic bags and foam parts after appliance has been unpacked.
•Children should never be left alone or unattended in the area where appliances being unpacked.
•If you have any doubts, do not use the appliance and call on a qualified tech- nician.
OWNER RESPONSIBLE FOR DAMAGE RESULTING FROM TIPPING MACHINE AFTER REMOVING SHIPPING BOLTS. AVOID TIPPING MACHINE FORWARD AFTER SHIPPING BOLTS ARE REMOVED
Inspecting WHEN TO REMOVE SHIPPING BOLTS!
WARNING!!! TIPPING THE MACHINE TO POSITION IT FOR USE MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE MACHINE!
TIPPING THE MACHINE WITHOUT SHIPPING BOLTS, CAN CAUSE THE INNER DRUM TO IMPACT OTHER INTERNAL PARTS, THUS DAMAGING THEM. POSITION THE MACHINE AS CLOSE AS POSSIBLE TO IT’S FINAL POSITION AND THEN REMOVE SHIPPING BOLTS.
√ INSPECT CONTENTS
[ ] Owners Manual
[ ] (Must be installed on hot and
[ ] Warranty Registration Card
[ ] Majestic Literature
SHIPPING
BOLT
Page 6
Majestic LLC © 01/01/2006
