Makita 3606 MAINTENANCE

Install the trimmer guide on the tool base with the wing bolt

(B). Loosen the wing bolt (A) and adjust the distance

between the bit and the trimmer guide by turning the fine

adjusting screw (1.5 mm or 1/16” per turn). At the desired

distance, tighten the wing bolt (A) to secure the trimmer

guide in place. When adjusting the guide roller up or down,

loosen the wing nut (C). After adjusting it, tighten the wing

nut (C) securely.

When cutting, move the tool with the guide roller riding the

side of the workpiece.

MAINTENANCE CAUTION:

•Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

To maintain product SAFETY and RELIABILITY, repairs, car-

bon brush inspection and replacement, any other mainte-

nance or adjustment should be performed by Makita

Authorized or Factory Service Centers, always using Makita

replacement parts.

1. Wing bolt (B)

2. Fine adjusting screw

3. Wing bolt (A)

4. Wing nut (C)

5. Guide roller

003699

1. Bit

2. Guide roller

003701