Straight guide (Optional accessory)
The straight guide is effectively used for straight cuts when chamfering or grooving.
Install the straight guide on the guide holder with the wing bolt. Then use the hex wrench to loosen the bolts on the tool base and insert the guide holder into the grooves in the tool base. Adjust the dis- tance between the bit and the straight guide and tighten the bolts securely. When adjusting the straight guide up or down, loosen the wing bolt. After adjusting it, tighten the wing bolt securely.
I Guide holder | \ |
When cutting, move the tool with the straight guide flush with the side of the workpiece.
Wider straight guide of desired dimensions may be made by using the convenient holes in the guide to bolt on extra pieces of wood.
7
