Bevel cutting
With the base tilted,. vou, can make bevel cuts a t any angle between 0" and 45" (left or right).
Loosen the bolt on the back of the base with the hex wrench, and slide the base backwards. Tilt the base to the desired angle. The edge of the housing indicates the bevel angle. Then check for contact between the back edge of the blade and the roller.
Now tighten the bolt securely on the back of the base.
Roller .Edge of housing
Front flush cutsI'1 Loosen the bolt on the back of the base
with the hex wrench, then slide the base backwards. Check the contact between the back edge of the blade and the roller, then secure the bolt.
8
