Keep the blade shank flush with the installing position so that it does not ride up on the shoulder of the blade holder. Tighten the bolt securely with the hex wrench.
3lade shank rides; up on shoulder I f blade holder.
I
I
I
I
I | I L - J | |
I | ||
|
Blade holder
Correct I
Blade | Blade |
Nrong
Using roller
With the hex wrench, loosen the bolt which holds the base and retainer. Slide the re- tainer so that the roller contacts the blade, then tighten the bolt. However, when using
ablade that does not have a straight back (e.g., Nos. 6, 71,slide the retainer back so that the roller will not contact the blade.
CAUTION :
Use a lubricant or cutting oil between the blade and roller when cutting iron or composi- tion board, etc. Failure to do so will shorten the service life of your blade and roller.
Hex wrench storage
When not in use, the hex wrench can be conveniently stored.
6
