Makita 4323 OPERATION

OPERATION CAUTION:

•Always hold the base flush with the workpiece. Failure to

do so may cause blade breakage, resulting in a serious

injury.

•Advance the tool very slowly when cutting curves or

scrolling. Forcing the tool may cause a slanted cutting

surface and blade breakage.

Turn the tool on without the blade making any contact and

wait until the blade attains full speed. Then rest the base flat

on the workpiece and gently move the tool forward along the

previously marked cutting line.

CAUTION:

•Always be sure that the tool is switched off and

unplugged before tilting the base.

•Raise the dust cover all the way before making bevel

cuts.

With the base tilted, you can make bevel cuts at any angle

between 0° and 45° (left or right).

Loosen the bolt on the back of the base with the hex wrench.

Move the base so that the bolt is positioned in the center of

the cross-shaped slot in the base.

1. Cutting line

2. Base

002743

002746

1. Hex wrench

2. Bolt

3. Base

002748