Finishing edges, Metal cutting | Makita 4351T, 4351FCT, 4351CT

B) Plunge cutting:

facing down. Slide the rip fence to the desired cutting width position, then tighten the bolt to secure it.

008037

You need not bore a starting hole or make a lead-in cut if you carefully do as follows.

(1)	Tilt the tool up on the front edge of the base
	with the blade point positioned just above the
	workpiece surface.
(2)	Apply pressure to the tool so that the front
	edge of the base will not move when you
	switch on the tool and gently lower the back
	end of the tool slowly.
(3)	As the blade pierces the workpiece, slowly
	lower the base of the tool down onto the

008040

008041

1. Rip fence

1.Hex wrench

2.Bolt

3.Fence guide

workpiece surface.

(4) Complete the cut in the normal manner.

Finishing edges

008038

To trim edges or make dimensional adjustments, run the blade lightly along the cut edges.

Metal cutting

Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant.

Rip fence set (optional accessory)

CAUTION:

•Always be sure that the tool is switched off and unplugged before installing or removing accessories.

1.Straight cuts

When repeatedly cutting widths of 160 mm (6-5/16") or less, use of the rip fence will assure fast, clean, straight cuts. To install, insert the rip fence into the rectangular hole on the side of the tool base with the fence guide

2.Circular cuts

008042
	1.	Fence guide
	2. Threaded knob
	3.	Circular guide
		pin
	2
1	3
008043

When cutting circles or arcs of 170 mm (6-11/16") or less in radius, install the rip fence as follows.

Insert the rip fence into the rectangular hole on the side of the base with the fence guide facing up. Insert the circular guide pin through either of the two holes on the fence guide. Screw the threaded knob onto the pin to secure the pin.

Now slide the rip fence to the desired cutting radius, and tighten the bolt to secure it in place. Then move the base all the way forward.

4351CT, 4351T, 4351FCT specifications

The Makita 4351FCT, 4351T, and 4351CT are powerful and efficient tools designed for professional woodworkers and DIY enthusiasts alike. Each model features an array of advanced technologies and robust characteristics that set them apart in the market.

One of the standout features of these jigsaws is the variable speed control that allows users to adjust the speed of the blade between 800 and 2,800 strokes per minute. This flexibility makes it easy to tailor the speed to suit different materials and types of cuts. The saws are equipped with a powerful 720W motor, providing sufficient power for cutting through various materials, including wood, plastic, and metal.

The 4351 series incorporates a patented tool-less blade change system, which simplifies the process of swapping out blades. This feature enhances productivity by allowing users to change blades quickly without the need for additional tools. The saws also support a wide variety of blade types, granting excellent versatility while tackling different projects.

Another remarkable characteristic is the built-in LED light that illuminates the cutting line, ensuring accuracy even in poorly lit work environments. Additionally, the dust blower function keeps the cutting line clear from debris, providing better visibility and cleaner cuts.

In terms of design, the Makita 4351FCT, 4351T, and 4351CT all feature an ergonomic grip that enhances comfort during prolonged use. The saw's rubberized grip reduces vibrations, minimizing fatigue and enabling more precise control. The adjustable base plate allows for bevel cuts of up to 45 degrees, giving users the ability to execute intricate designs effortlessly.

All models in the 4351 series come with a 3-year limited warranty, reflecting Makita's commitment to quality and durability. They are designed to withstand the rigors of daily use, making them a reliable choice for professionals in construction, carpentry, and renovation.

When it comes to performance, the Makita 4351FCT, 4351T, and 4351CT lead the pack with their exceptional cutting speed, precision, and ease of use. Whether you are a seasoned professional or a hobbyist, these jigsaws are perfect for achieving outstanding results in any woodworking project.

Makita 4351T, 4351FCT, 4351CT Finishing edges, Metal cutting, Rip fence set optional accessory

Models: 4351CT 4351T 4351FCT