ADDITIONAL SAFETY
RULES
FOR CHARGER AND
TOOL
1.
The Charger and the tool are specifically designed to
work together.
Do
not
attempt to charge any other cordless
tool
with this Charger.
Do
not attempt
to charge the
tool with any other charger.
2.
Do
not charge the tool when temperature
is BELOW
10°C (5OOF) or ABOVE
45OC
(113OFI.
3.
Do not use charger in damp
or wet locations.
4.
Do
not attempt to use a step-up transformer, an engine generator
or
DC
5. Do
not store the tool in locations where the temperature may reach
or exceed
6. Do not incinerate the tool even
if it
is severely damaged
or is completely
7.
Be aware that this tool
is always in an operating condition, because it does
8. Always be sure you have a firm footing.
9. Hold the tool firmly.
power receptacle.
5OoC
(122OF). worn out. The tool can explode in a
fire.
not have to be plugged into an electrical outlet.
Be sure
no
one isbelow when using the tool in high locations.
IO.
Keep hands away from rotating parts.
1
1.
When drilling into walls,
floors or wherever "live"
electrical wires may be
encountered,
DO NOT TOUCH ANY METAL PARTS
OF THE TOOL!
Hold the
tool
only by the plastic handle
or
plastic tool body
to
prevent electric
shock
if
you drill into a "live"
wire. 12.
Do not leave the tool running. Operate the tool only when hand-held.
13. Do not touch the drill bit
or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
5