ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF).
2.Do not attempt to use a
3.Do not allow anything to cover or clog the charger vents.
4.Always cover the battery terminals with the battery cover when the battery cartridge is not used.
5 . A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
(1)Do not touch the terminals with any conductive material.
(2)Avoid storing battery cartridge in a container with other metal objects such a s nails, coins, etc.
(3)Do not expose battery cartridge to water or rain.
6. Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).
7. Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
2.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
3.Hold the tool firmly.
4.Keep hands away from rotating parts.
5 . When drilling into walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock if you drill into a "live" wire.
6. Do not leave the tool running. Operate the tool only when
7. Do not touch the drill bit or the workpiece immediately after operation: they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
