12

Installingor removing driver bit or drill bit

Hold the ring and turn the sleevecounterclockwise to open
the chuck jaws.Pla ce the bit in the chuck as faras it will go.
Hold the ring firmly and turn the sleeve clockwiseto tighten
thech uck.
To remove the bit, hold the ring and tur n the sleevecounter -
clockwise.
When not using the driver bit, keep it in the bit holders. Bits
45mm long can b e keptthe re.
OPERATION

Screwdrivingoperation

First,slid et he action mode change lever to the position of
symbolan d select the fastening torque.
Place the point of the driver bit in the screw head and apply
pressure to the tool. Start the tool slowly and then increase
the speed gradually. Release the switch trigger as soon as
thecl utchcut s in.
CAUTION:
•Makesurethat the driver bit is inserted straight in the
screwhead, or the screw and/or bit may be damaged.
•Whendriving wood screws, predrill pilotholes to make
driving easier and to prevent splittingof the workpiece.
Seethe ch art.
1. Sleeve
2. Ring
1
2
001899
1. Bit
2. Bit holder
12
001900
001901