Manual driving operation
This tool can be used as a manual screwdriver when the switch is in the off position. Be sure to keep your finger off the switch when performing manual driving operation
CAUTION:
When performing manual driving operation, do not insert a screwdriver, etc. into the hole in the end of the tool to increase torque on the screw. This may cause tool damage.
Application |
|
| Dimensions of screw |
| Workpiece | Fastenings |
|
|
| 3.1 mm x 20 m m |
|
| 220 screws |
|
|
| (1/8”x 3/4”) |
|
| |
Wood screws |
|
|
| Lauan wood |
| |
|
|
|
|
| ||
|
|
| (5/32“ x 3/4”) |
|
| 110 screws |
|
| 1 | I | I |
| |
~~~~~ | ~ |
|
| |||
Machine screws | 5 mm (13/64”) | 400 screws | ||||
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off before attempting to perform inspection or maintenance.
To maintain product SAFETY and RELlABl LITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
8
