Reversingswitch action
This tool has a reversing switch to change the direction of rotation. Move the revers- ing switch lever to the right for clockwise rotation or to the left for counterclock- wise.
Reversing switch lever
Counter- clockwise
CAUTION:
0 Always check the direction of rotation before operation.
0Use the reversing switch only when the tool comes to a complete stop. Changing the direction of rotation before the tool stops may ruin the tool.
Operation
Place the point of the driver bit securely in the screw head and apply pressure to the tool to the extent that the bit will not slip off the screw. Then start the tool and drive the screw.
CAUTION :
0 Use the proper bit for the head of the screw that you wish to use.
0 If the screw binds, turn the tool off immediately and perform manual driving operation. If you keep the switch on, the operating time per battery charge may be shortened. Also, it may cause a malfunction of the tool.
Make sure that the driver bit i s inserted straight in the screw head, or the screw and/or bit may be damaged.
0 When driving wood screws, predrill pilot holes to make driving easier and to pre-
vent splitting of the workpiece. See the 3.1 (118") chart.
3.5 (9/64")
7
