002339
1
2
1.Socket
2.Anvil
002344
1
2
1.Screw
2.Set plate
Installing or removing socket
To install the socket, push it onto the anvil of the tool until it locks into place.
To remove the socket, simply pull it off.
Installing set plate (optional accessory)
Always install the set plate when using battery cartridges 9100, 9102, 9101A. Install the set plate on the tool with the screw provided.
OPERATION
002354
Standard bolt
N.m |
|
|
|
|
| |
(ft.lbs) |
|
|
|
|
| |
| 80 |
|
|
|
|
|
Fasteningtorque | (58) |
|
|
|
| torquefastening |
20 |
|
| M12 (1/2”) | M10 (3/8”) | ||
| 60 |
|
|
|
| |
| (43) |
|
| M10 (3/8”) |
|
|
| 40 |
|
|
| M12 (1/2”) |
|
| (29) |
|
|
|
|
|
|
|
|
| M8 (5/16”) |
|
|
| (14) |
|
|
| M8 (5/16”) | Proper |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 0 | 1.0 | 2.0 | 3.0 | (S) |
|
|
| Fastening time |
|
|
| |
002355
The proper fastening torque may differ depending upon the kind or size of the bolt, the material of the workpiece to be fastened, etc. The relation between fastening torque and fas- tening time is shown in the figures.
Hold the tool firmly and place the socket over the bolt or nut. Turn the tool on and fasten for the proper fastening time.
NOTE:
• When fastening screw M8 (5/16”) or smaller, carefully |
High tensile bolt
N.m
(ft.lbs)
| 80 |
torque | (58) |
(43) | |
Fastening | 60 |
40 | |
| (29) |
20
(14)
M10 (3/8”)
M8 (5/16”)
M10 (3/8”)
M8 (5/16”)
Proper fastening torque
| adjust pressure on the switch trigger so that the screw is |
| not damaged. |
• | Hold the tool pointed straight at the bolt or nut. |
• | Excessive fastening torque may damage the bolt/nut or |
| socket. Before starting your job, always perform a test |
0 | 1.0 | 2.0 | 3.0 | (S) |
Fastening time
operation to determine the proper fastening time for your |
bolt or nut. Especially for the bolt smaller than M8 (5/ |
16”), perform the above test operation to prevent the |
trouble on socket or bolt, etc. |
10
