After use, return the chuck key to the storage cavity on the tool.
I
Switch action
Set the reversing switch lever just in front of the trigger switch to Forward (FWD) or Reverse (REV) . Then pull the trigger to turn the tool ON and release it to turn it OFF. To change the direction of bit rota- tion, release the trigger, let the tool come to a complete stop, and then slide the reversing switch lever to the opposite side. When the reversing switch lever is in the neutral position, the tool will not start even if you pull the trigger.
CAUTIONS :
When not operating the tool, keep the reversing switch lever in the neutral position.
0 Before operation, always check to be sure that the reversing switch lever is set for the desired direction of rotation.
7
