Pelco IXE manual Specifications, General, Electrical, Mechanical, Video

Specifications

General

Imaging Device	1/3-inch (effective)
Imager Type	CMOS
Imager Readout	Progressive scan
Maximum Resolution	1920 x 1080
Signal-to-Noise Ratio	50 dB
Auto Iris Lens Type	DC drive
Electronic Shutter Range	1~1/10,000 sec
Wide Dynamic Range	60 dB
White Balance Range	2,000° to 10,000°K
Sensitivity	f/1.2; 2850°K; SNR >24 dB
Color (1x/33 ms)	0.50 Lux
Color SENS (15x/500 ms)	0.12 Lux
Mono (1x/33 ms)	0.25 Lux
Mono SENS (15x/500 ms)	0.03 Lux

Electrical

Port	RJ-45 connector for 100Base-TX
	Auto MDI/MDI-X
Cabling Type	Cat5 or better for 100Base-TX
Power Input	24 VAC or PoE (IEEE 802.3af class 3)
Power Consumption
(camera only)	<7 W
Current Consumption
PoE	<200 mA maximum
24 VAC	<295 mA nominal; <390 mA maximum
Local Storage	Mini SD
Alarm Input	10 VDC maximum, 5 mA maximum
Relay Output	0 to 15 VDC maximum, 75 mA maximum
Service Connector	External 3-connector, 2.5 mm provides NTSC/PAL video output

Mechanical

Lens Mount	CS mount, adjustable
Camera Mount	0.25-inch (0.64 cm) UNC-20 screw, top and bottom of camera housing

Video

Video Encoding		H.264 high, main, or base profile and MJPEG
Video Streams		Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate		Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2.5, 2, 1
		(dependent on the coding, resolution, and stream configuration)
Available Resolutions
		Resloution				MJPEG	H.264 High Profile
	MPx	Width	Height	Aspect	Maximum	Recommended	Maximum	Recommended
				Ratio	IPS	Bit Rate	IPS	Bit Rate
	2.1	1920	1080	16:9	15.0 ips	10.0 Mbps	15.0 ips	3.8 Mbps
	1.9	1600	1200	4:3	20.0 ips	10.0 Mbps	20.0 ips	4.0 Mbps
	1.3	1280	1024	5:4	20.0 ips	10.0 Mbps	20.0 ips	3.4 Mbps
	1.2	1280	960	4:3	20.0 ips	10.0 Mbps	20.0 ips	3.3 Mbps

C2953M-A (5/09) 55