CAUTION:
0 Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pres- sure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.
.There is a tremendous force exerted on the tool/bit a t the time of hole breakthrough. Hold the tool firmly and exert care when the bit begins to break through the workpiece.
0 A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hole it firmly.
.Always secure small workpieces in a vise or similar
Selecting correct Phillips bit
Use the chart to determine the best size driver bit for the size of screw that you wish to use.
| Nominal Diameter (mm) |
Bit No. | Wood screw |
| 2.1 - 2.7 (3/32"- 1/8") |
No. 2 | 3.1- 3.8 (1/8"- 5/32") |
CAUTION :
If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceedingwith a fresh battery.
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
To maintain product SAFETY and RELlABlLITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
9
