Switch action
To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
CAUTION :
Before plugging in the tool, always check to see that the trigger switch actuates properly and returns to the "OFF" position when released.
Operation
Hold the tool firmly. Turn the tool on and then apply the abrasive disc to the work- piece. In general, keep the abrasive disc a t an angle of about 15' to the workpiece surface. Apply slight pressure only. Exces- sive pressure will result in poor perform- ance and premature wear to the abrasive disc.
6
