ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OFI.
2.Do not attempt to use a
3.Do not allow anything to cover or clog the charger vents.
4.Do not short the battery cartridge. A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
5.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).
6.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
FOR CORDLESS FINISHING SANDER
1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
2.Hold the tool firmly with both hands.
3.Do not leave the tool running. Operate the tool only when
4.This tool has not been waterproofed, so do not use water on the working surface.
SAVE THESE INSTRUCTIONS.
5
