Switch action
*To start the tool, simply push the switch I | Switch button |
| |
button. Release the switch button to |
|
stop. |
|
CAUTION : |
|
Before inserting the battery cartridge into |
|
the tool, be sure the switch actuates pro- |
|
perly. |
|
I
Operation
*A finishing sander i s generally used to re- move only a small amount of material a t a time. Since the quality of the surface is more important than the amount of stock removed, do not bear down on the sander. Keep the base flush with the material at all times. Undue pressure may damage the paper and shorten tool life.
CAUTION :
Never run the tool without paper. YOU may seriously damage the pad.
*You can put a high polish on furniture or other fine surfaces by using a cloth under the sander.
CAUTION :
If the tool i s operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery.
8
