Chain blade sharpening attachment
1. Read the instruction manual of yo:' chain saw to determine the size of wheel point, the top plate filing angle (30"or 35 ) and the depth gauge clearance [0.025"(0.64mm), 0.030"(0.76mm), 0.035" (0.89mm) or 0.040'(1.02mm)] before use.
17
Too d a t e filinq anqle | I |
Depth gauge
clearance
2.Three sizes of wheel points are available: 5/32"(4.0mm), 3/16"(4.8mm) and 7/32" (5.5mm).Select a proper wheel point for chain cutters to be sharpened.
3.Attach the guide to the tool as shown in the figure after installing the wheel point.
4. Place the guide on the gauge as shown in | I Guide |
| I |
the figure and turn the guide until the | Wheel point | ||
wheel point fits into the appropriate | |||
wheel size slot in the gauge. (The wheel |
|
|
|
point will raise up out of the bottom |
|
|
|
of the slot by turning the guide counter- |
|
|
|
clockwise). After adjusting the wheel |
|
|
|
point to fit into the slot, tighten the |
|
|
|
wing bolt securely. |
|
|
|
9
